ATEX Directive 2014/34/EU
Ensure compliance for equipment and protective systems intended for use in potentially explosive atmospheres across the European market.
Overview
What is ATEX 2014/34/EU
ATEX conformity assessment process that demonstrates that equipment and protective systems intended for use in potentially explosive atmospheres comply with the requirements of the European Union’s ATEX Directive 2014/34/EU. The directive is designed to ensure a high level of safety by minimizing the risk of ignition in environments where flammable gases, vapors, mists, or combustible dust may be present.
ATEX applies to a wide range of industries where explosive atmospheres can occur, including oil and gas, chemical processing, petrochemicals, pharmaceuticals, mining, food processing, power generation, and manufacturing facilities. Products such as motors, sensors, control panels, lighting systems, pumps, valves, and other electrical or mechanical equipment used in hazardous areas may require ATEX compliance before being placed on the market.
The ATEX regulatory framework establishes essential health and safety requirements, equipment classification categories, conformity assessment procedures, technical documentation obligations, and product marking requirements. Manufacturers seeking access to the European Economic Area (EEA) must ensure their products meet the applicable ATEX requirements and, where necessary, undergo assessment by a notified body. Achieving ATEX Certification helps organizations demonstrate compliance, enhance product safety, and gain access to European markets with confidence.
Products Covered
Which Products Require ATEX Certification?
ATEX certification applies to equipment and protective systems intended for use in potentially explosive atmospheres. The following product categories commonly require ATEX assessment and compliance before being placed on the European market.
Cable Glands
Cable Glands
Cable glands designed for secure cable entry and protection in hazardous industrial environments such as oil & gas facilities, chemical plants and refineries.
Industrial Lighting
Industrial Lighting
Lighting fixtures designed for safe operation in areas where flammable gases, vapors or combustible dust may be present.
Pumps & Compressors
Pumps & Compressors
Mechanical equipment used for transferring liquids and gases within potentially explosive atmospheres.
Sensors & Instrumentation
Sensors & Instrumentation
Measurement and monitoring devices used to control processes in hazardous locations.
Control Panels
Control Panels
Electrical control systems designed and certified for operation in explosive environments.
Fuel Dispensers
Fuel Dispensers
Fuel dispensers used for safe and accurate fuel dispensing in hazardous environments such as petrol stations, oil terminals and refineries.
Non-ELECTRICAL
ATEX for Non-Electrical Products:
For Non Electrical Products which fall into Category 2 & 3 an EU type Examination is not required.
For category 2 Non Electrical Equipment, the technical file shall be submitted to the notified body and shall be archived/stored with Notified body for 10 years. An acknowledgment for archive of technical file will be issued by Notified Body, under this the technical file is not reviewed by the Notified Body.
For Category 3 Non Electrical Equipment, there is no legal requirement to submit the technical file with the Notified Body, the manufacture can self declare the compliance and can use the marking once the technical file is complete.
Certification Process
Our Certification Process
REQUIREMENTS
Required Documents
Why Us?
Why Choose TCMS
Useful Links
FAQs
ATEX Certification demonstrates that equipment or protective systems intended for use in potentially explosive atmospheres comply with the requirements of the ATEX Directive 2014/34/EU. It helps ensure product safety and legal market access within the European Economic Area (EEA)
Yes. Products covered by the ATEX Directive must comply with applicable requirements before they can be placed on the European market. Depending on the equipment category, certification by a notified body may be required.
ATEX certification may be required for electrical and non-electrical equipment used in hazardous areas, including motors, pumps, lighting systems, sensors, control panels, valves, fans, and other equipment operating in explosive atmospheres.
Industries such as oil and gas, petrochemicals, chemical processing, mining, pharmaceuticals, food processing, power generation, and manufacturing frequently require ATEX-compliant products and equipment.
In many cases, yes. Testing and technical evaluation are often required to verify compliance with applicable ATEX standards and essential safety requirements. The exact requirements depend on the product category and intended use.
The certification timeline varies depending on product complexity, documentation readiness, testing requirements, and the conformity assessment procedure. Most projects are completed within a few weeks to several months.
Certification costs depend on factors such as product type, equipment category, testing requirements, technical documentation, and the scope of assessment. A detailed quotation is typically provided after an initial review.
Manufacturers generally need to provide technical drawings, product specifications, risk assessments, user manuals, bills of materials, test reports, and other supporting documentation required for conformity assessment.
Request ATEX Directive 2014/34/EU support
Our experts are ready to support your certification journey.